Setting up a Brick Paver Walkway or Brick Flooring

The usage of Bricks or Pavers to develop a sidewalk or patio matches a home in a method that is unmatched. In addition, installing a Brick or Paver walkway does not always need a pro.

The secret to setting up a Brick or Paver Walkway is to very first effectively prepare the location where the bricks/pavers are to be installed. The area must be dug out at least a foot down, removing all topsoil and clay soil. In addition, string lines ought to be strung on each side of the walkway. The string lines indicate the ended up height of the sidewalk.
When the area has actually been dug down, 3/4" gravel stone need to be laid in and tamped down securely. Then 2" of sand, or stone dust must be spread over the gravel. Again the sand/stone dust should be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline need to equate to the thickness of the brick or paver.

Now that you have a steady base, place a 1" pipeline or ledger board the length of the sidewalk on either side of the walkway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Install a work on both sides of the prepared location. These strips will act as your pathway border and aid to maintain the integrity and shape of the sidewalk. You can get these plastic strip borders at the majority of home enhancement stores. The strips must be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to make sure that they interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again assist keep the stability of the walkway.

Inevitably bricks/pavers will require to be cut or split when building the walkway. Unless you wish to buy or lease a costly wetsaw, I would suggest purchasing a simple brick/paver splitter. It is generally a sculpt with a broad end that is the width of the bricks/pavers. To really cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you desire to break the brick. Then using a hammer strike the butt end bricks pavers of the sculpt strongly. You may need to do this a number of times. You may also desire to turn the brick/paver over and strike the other side get more info of the brick using the hammer and chisle. Within a couple of strikes the brick/paver ought to break easily. If your pathway has curves you will require to buy/rent a wetsaw.

After installing the bricks, develop the outdoors edges with additional sand, and after that shovel in the topsoil and pack down securely.
Spread stone dust over the new walkway and sweep into the cracks. This will complete the interlocking of the bricks and help to eliminate any weed growth.


In addition, installing a Brick or Paver pathway does not necessarily require a pro. The secret to setting up a Brick or Paver Walkway is to very click here first appropriately prepare the location where the bricks/pavers are to be installed. Now that you have a stable base, position a 1" pipe or journal board the length of the pathway on either side of the walkway. These strips will act as your sidewalk border and assistance to preserve the integrity and shape of the pathway. Inevitably bricks/pavers will need to be cut or divided when constructing the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *